Main Top Image

RFID Proximity Cards

A smart card, chip card, ISO-Card or integrated circuit card (ICC), is any pocket-sized card with embedded integrated circuits which can process data. Contactless Smart Card, in which the chip communicates with the card reader through RFID induction technology, require only close proximity to an antenna to complete transaction. They are often used when transactions must be processed quickly or hands-free, such as on mass transit systems, where smart cards can be used without even removing them from a wallet.

The international standard ISO/IEC 7810 defines the physical characteristics for identity or identification cards. The standard size is 85.60 ื 53.98 mm (3.370 ื 2.125 in).


    Low Frequency Cards

    RFID Proximity Cards

    125kHz chip technology;
    • EM4102 / EM4200
    • TK4200
    • NXP Hitag-S256 / NXP Hitag-S2048

    Enquire Information

    High Frequency Cards

    RFID Proximity Cards

    13.56MHz chip technology;
    • NXP i-Code Sli - ISO 15693
    • NXP Mifare 1S50 (1K) - ISO 14443
    • Mifare 1S70 (4K) - ISO 14443
    • NXP Mifare Ultra Light - ISO 14443A
    • NXP Mifare DESFire EV1 - ISO 14443A
    • TK1S50 (1K) - ISO 14443

    Enquire Information

The standard for contactless smart card communications is ISO/IEC 14443. It defines two types of contactless cards ("A" and "B"), allows for communications at distances up to 10 cm. An alternative standard for contactless smart cards is ISO 15693, which allows communications at distances up to 50 cm.


    Ultra High Frequency Cards

    RFID Proximity Cards

    868MHz chip technology;
    • NXP UCODE G2XL - EPC Gen2 ISO 18000-6C

    Enquire Information

GS1 is an international not-for-profit association dedicated to the development and implementation of global standards and solutions to improve the efficiency and visibility of supply and demand chains globally and across multiple sectors. EPCglobal is leading the development of industry-driven standards for the Electronic Product Code™ (EPC) to support the use of Radio Frequency Identification (RFID) in today’s fast-moving, information rich, trading networks.
In 2004 a new protocol, the Class 1 Generation 2 interface was created. This EPC Gen2 standard was approved in December 2004 and with minor modifications adopted in 2006 as ISO 18000-6C.


    Dual Frequency Cards

    RFID Proximity Cards

    Dual Frequency chip technology;
    • Impinj Monza-3 & NXP i-Code Sli
    • NXP UCODE G2XL & NXP Mifare Ultra Light
    • Other combinations on request.

    Enquire Information

Dual frequency cards are offering the combination of the UHF technology for Far Field Communication often combined with a Mifare chip for using the NFC secure data communication. The combination within a loyalty or membership card - payment in the clubs' bar - and car parking access is a typical application.


    Personalizing your Cards?

    RFID Staff ID-Card RFID Proximity Cards RFID Proximity Cards
    RFID Staff ID-Card RFID Staff ID-Card

    Optional Printing Service;
    • chip UID number, sequential number, logo
    • laser printing
    • graphical full colour
    • minimum order quantity 1,000 units

    Enquire Information

Order Information

Price

Our prices are updated monthly to offer you the best possible price. Product pricing given are valid for 10 working days unless specified differently in writing.
Cybernetics remains the right to alter pricing without prior notice due to Exchange rate fluctuations

Quality

Cybernetics provide a guarantee for the supplied RFID transponders. Any non functioning transponder, supplied by Cybernetics, will be replaced at no cost. Claims have to be made within 14 days after date of original delivery by returning the faulty transponders. Cybernetics is entitled to test these faulty transponders in its (Dutch) RFID laboratory.

Terms & Conditions

Whilst the Company will use reasonable endeavors to comply with any delivery date specified by the Customer and agreed or offered by the Company, time is not the essence of a sales contract and the Company shall not be liable for any delay or for the consequences of any delay in performing any part of obligations under any contract.

The goods the subject of a sales contract shall remain the Company’s property until the Customer has paid in full.


imported directly from the source

Cybernetics offers a wide range in RFID transponders ...NFC-tags ... Proximity-Cards ... Keyfobs ... Asset-tags ... Label & Luggage -tags ... Mount on Metal tags ... and Inlays ..

But can also offer customized tags on request ...

Please contact us for a price quotation!

Or call us at: 0845 004 9706.